After checking my board in preparation for the replacement of the Motor Assembly, I noticed that there are at least two versions of the E-GO Cruiser out there: old and current. The Technical Support at Yuneec USA confirmed with me that I have the current version. The current version has a big heatsink extending out both side of the Electronic Control Unit (ECU), as shown in my photo above. Also, the power switch is on the battery, not on the ECU. The above photo of an old version is from this unboxing video: https://www.youtube.com/watch?v=VhstQCeav94. As you can see, there is no heatsink extending out of the ECU. Also, the power switch and red LED is on the ECU.
May be it is a good idea to verify with the seller before placing your order!
0 Comments
Leave a Reply. |
DarrylTaking up longboarding... Archives
November 2018
Categories
All
|